How to Fit a Corded Wall-Fix Curtain Track
If you’ve chosen one of our corded curtain tracks and you’re fitting it directly to the wall, this step-by-step video will show you exactly how to do it.
I’m Lee from Ezecurtains, and in the video below I’ll walk you through bracket positioning, wall fixings, and a few important checks for corded tracks so everything runs smoothly and safely.
Watch the Fitting Video
Tools & Fixings You’ll Need
- Drill / driver
- Suitable drill bit for your wall type (often a 6mm masonry bit)
- Wall plugs and screws appropriate for your wall
- Tape measure
- Pencil
- Spirit level
- Step ladder
Step-by-Step: Fitting a Corded Wall-Fix Track
1) Decide the track height and position
Start by deciding how high the track needs to sit above the window. This is usually just above the window frame so the curtains hang neatly without fouling the wall or glass.
Use a pencil and spirit level to mark a straight guide line along the wall. This makes bracket positioning easier and keeps the finished track looking neat.
2) Position and mark the wall brackets
Offer the track up to the wall and mark through the fixing holes in the brackets. Space the brackets evenly along the length of the track so the weight of the curtains is supported properly.
On corded tracks, it’s also important that everything is fitted square and true — it helps the cords run smoothly and keeps the curtains drawing evenly.
3) Drill and fix the brackets
Drill your fixing holes using the correct bit for your wall type, insert the plugs, then fix the brackets securely.
If one fixing doesn’t feel solid, it’s normally a quick fix — move slightly, re-drill if needed, and use the best plug for that part of the wall.
4) Clip the track into the brackets
Once the brackets are fitted, clip the track into place. Work along the track so it locates properly into each bracket.
Check that the track sits level and straight before moving on.
5) Fit and secure the cord tensioner
Corded tracks include a cord tensioner which keeps the cords under control at the side of the window. For child safety, the cord needs to be secured properly.
Follow the method shown in the video to position the tensioner neatly on the wall, then secure it firmly so the cords remain tidy and run correctly.
FAQs
The fixing method is very similar, but corded tracks have a few extra checks — mainly keeping everything level and fitting the cord tensioner properly so the cords run smoothly and safely.
Yes — the cord needs to be secured for child safety. It also keeps the cords tidy and helps them stay in the correct channels during use.
Plasterboard walls are common. The key is using fixings that spread the load, With corded tracks especially at the die you are pulling the cords. I would use toggle bolts to secure that bracket. the constant pulling on the cord can loosen the bracket over time.
Yes — most people can fit a corded track on their own. Taking your time marking out all the bracket positions and marking the screw holes. Making sure to keep everything level makes the job much easier.
If you’re unsure, send me a quick photo of the wall and I’ll advise on the best fixing method before you start drilling.
If you’d like me to check anything before you start — wall type, fixing method, or where to place the brackets — you don’t need to guess. You can get an instant price for the right track below, or send me a photo and I’ll advise.