How to Add or Remove Gliders from Our Corded Curtain Tracks

Got too many or too few gliders on your Corded curtain track? Don’t worry. It’s a quick adjustment, and I’ll show you exactly how to do it.

These instructions apply to both our straight and bay window Corded curtain tracks. You can watch the short video below or follow my step-by-step instructions.

Important: Always add or remove gliders from the outside ends of your curtain track, not from the middle where the curtains meet.

Watch the 60-Second Glider Adjustment Video

In this video, I’ll demonstrate how to remove the end pulley, adjust the number of gliders and put everything back together. I’ll also show you a quicker way to add extra gliders without removing the pulley.

What You’ll Need

You’ll only need a small crosshead screwdriver if you’re removing the end pulley.

  • Small Phillips (crosshead) screwdriver
  • Any additional curtain track gliders you want to fit

If you’re simply clipping additional gliders into the track, you won’t need any tools.

Step-by-Step: Adding or Removing Corded Track Gliders

These instructions are for the Corded curtain tracks we supply. You can make the adjustment while the track is fitted, although it may be a little easier before installation.

1. Work from the Outside End of the Track

Start at the outside end of the curtain track, where you’ll find the end pulley.

Don’t try to add or remove gliders from the middle of the track. Always work from the outside ends.

2. Loosen the End Pulley Screw

You’ll find a small screw underneath the end pulley.

Use a small Phillips screwdriver to loosen the screw a few turns. You don’t need to remove it completely.

Once loosened, carefully slide the pulley off the end of the track, just far enough to access the gliders.

My tip: Don’t pull the pulley too far away from the track. Keeping the cords close to their normal position makes everything easier to put back together.

3. Add or Remove the Gliders

With the end pulley moved aside, you can slide unwanted gliders out of the track or insert additional gliders into the channel.

Check how many gliders you need for each curtain. If you’re hanging a matching pair, you’ll normally want the same number on each side.

When inserting the gliders, make sure the flat side faces into the room.

4. Refit and Secure the End Pulley

Once you’ve finished adjusting the gliders, slide the end pulley back into position.

You may find it easier to pull gently on the operating cords from the opposite end of the track while guiding the pulley back into place.

Before tightening the screw, check that the cords are running freely and haven’t become twisted or trapped.

When everything is correctly positioned, tighten the pulley screw securely.

5. Check That Everything Runs Smoothly

Move the gliders along the track and check that they run freely.

Operate the cords to make sure the track opens and closes smoothly, without the cords catching or rubbing.

Once you’re happy, you’re ready to hang your curtains.

A Quicker Way to Add Extra Gliders

If you only need to add a few extra gliders, there’s another method that doesn’t involve removing the end pulley.

Our Corded track gliders can be clipped directly into the track channel.

  1. Hold the glider with its flat side facing into the room.
  2. Hook one side of the glider into the track channel, with the glider angled towards the window.
  3. Place your thumb or finger behind the glider and push it firmly forwards.
  4. The glider will compress slightly and snap into the track channel.
  5. Check that it’s properly seated and moves freely.

Remember: This method is for adding gliders only. If you need to remove gliders, you’ll need to take off the end pulley as explained above.

How Many Curtain Track Gliders Do You Need?

The number of gliders you need depends on the type of curtain heading you’re using.

For pencil-pleat curtains with approximately twice fullness, a useful starting point is around 20 gliders per metre of track.

However, if you’re reusing existing curtains, there’s an even easier way to work it out.

Simply count the hooks in your curtains. That’s the number of gliders you’ll need to hang them.

There’s no need to add extra gliders simply because the track has space for them.

Corded Curtain Track Glider FAQs

Can I add or remove gliders without dismantling the track?

You can add extra gliders by clipping them directly into the track channel, without removing the end pulley.

However, if you want to remove gliders, you’ll need to loosen and slide off the end pulley to access them.

You don’t need to remove the complete curtain track from its brackets.

Is there a correct way to insert the gliders?

Yes. The flat side of the glider should face into the room.

To clip one into the track, hook one side into the channel with the glider angled towards the window, then push it firmly forwards until it snaps into place.

How many gliders do I need?

As a general guide, allow approximately 20 gliders per metre of track for pencil-pleat curtains with around twice fullness.

If you’re reusing existing curtains, count the curtain hooks instead. That will tell you exactly how many gliders you need.

How do I remove the end pulley?

Use a small Phillips screwdriver to loosen the screw underneath the end pulley by a few turns.

Carefully slide the pulley off the end of the track, just far enough to access the gliders. Avoid pulling it too far, as this can disturb the operating cords.

When you’ve finished, slide the pulley back into place, check that the cords run freely and tighten the screw.

Can I adjust the gliders while the track is fitted?

Yes. You can add or remove gliders while the curtain track is fitted.

If you know you need to make an adjustment before installing the track, it’s usually a little easier to do it beforehand.

Need a Little Help?

If you’re having difficulty adding or removing gliders from one of our Corded curtain tracks, get in touch and send me a photo. I’ll do my best to help you work out what needs adjusting.

Scroll to Top