How to Fit a Slimline Bay Window Curtain Track (Step-by-Step Video Guide)
Fitting one of our Slimline Bay Window Curtain Tracks is straightforward once you’ve seen how it’s done. Your track arrives professionally shaped to match your bay window, with the ceiling brackets normally already attached in their correct positions.
Our Slimline Bay Track comes in two halves with a joining piece. An overlap arm is also available as an optional extra if you’d like your curtains to overlap in the centre.
In the video below, I’ll show you how to position the return brackets, clip the Slimline track into place, centre it in your bay and secure the ceiling brackets. You’ll also see how the small bracket covers give everything a neat finish.
If you’re thinking about ordering a Slimline track, this guide will show you what’s involved. And if your track has already arrived, you can follow the video and written instructions as you fit it.
Watch the Slimline Bay Track Fitting Video
In the video, I demonstrate how to fit our Slimline Bay Window Curtain Track. There are a few details worth watching closely, particularly if this is your first time fitting one.
How the return brackets position the track
The return brackets on either side of the bay provide useful fixing points. Once they’re in place, you can support the track while positioning and securing the ceiling brackets.
How the Slimline track clips into its brackets
You’ll see how the front edge of the Slimline track hooks beneath the lip of the bracket. The track then twists backwards until it clicks into place. Tightening the retaining screw holds it securely.
Getting the track centred
Before securing the ceiling brackets, check that the track sits evenly in the bay. Small adjustments from left to right help you achieve a balanced gap between the track and the window.
Checking the ceiling fixings
Some screws will bite directly into timber, while others may only catch plasterboard. The video demonstrates how I check the fixings and revisit any that need a plug for extra support.
Keeping clear of plaster edges
You’ll also see why I avoid fixing brackets right on the edge of the plaster. Moving a bracket slightly away from the edge can help prevent the plaster cracking as the screw is tightened.
Fitting the Slimline bracket covers
Finally, I show how the small covers clip over the Slimline brackets and screws. They hide the fixings and give the finished installation a neat, low-profile appearance.
Watching these details before you begin will make the fitting process easier to understand.
Tools & Materials You’ll Need
You won’t need specialist equipment. A few basic DIY tools are normally all that’s required.
- Drill and 6mm masonry drill bit
- Rawl plugs and screws (supplied with your track)
- Tape measure
- Pencil for marking bracket positions
- Stepladder
- Screwdriver or power driver
- An extra pair of hands (recommended when lifting and centring the track)
Step-by-Step Fitting Instructions
These instructions relate to our standard glider Slimline Bay Window Curtain Track. Your track is supplied in two professionally shaped halves with a joining piece, and the ceiling brackets are normally already attached.
1. Unpack and Check Your Slimline Bay Track
Before fitting anything, unpack the two track halves and check their shape against your bay window.
Join the two halves using the supplied joining piece, making sure they’re correctly aligned. If you’ve ordered an optional overlap arm, check that it’s fitted in accordance with the instructions supplied with your track.
Your Slimline track may have returns on one or both sides of the bay. If you’ve ordered returns, you’ll need to fit wall brackets outside the bay as well as the ceiling brackets within it.
If your track doesn’t have returns, follow the relevant ceiling-fitting steps without fitting the return brackets.
2. Mark and Fit the Return Brackets
If your track has returns, start by fitting the wall brackets on either side of your bay. These provide useful support while you secure the track to the ceiling.
- Measure approximately 13–15cm from the external corner along the return wall. For a 20cm return, 15cm is normally a suitable position, provided there’s enough room.
- Use the ceiling inside the bay as your reference and draw a small pencil line across the return wall.
- Draw a second pencil line 2cm above the first.
- Position the bracket so the part above the screw hole lines up with the higher pencil line, then mark the two fixing holes.
- Drill the holes, insert the supplied plugs where needed, and screw the bracket securely into place.
Repeat the process on the opposite return if your track has returns on both sides.
3. Clip the Slimline Track into the Return Brackets
With the two track halves joined together, you’re ready to clip the track into the return brackets.
The Slimline track has a small lip along its upper edges, and the brackets have a corresponding lip at the front.
- Hook the front edge of the track beneath the lip at the front of the bracket.
- Twist the track backwards until you hear or feel it click into position.
- Tighten the small retaining screw underneath the bracket so the track is held securely.
Repeat at the other end so the track is supported by both return brackets before securing the ceiling brackets.
4. Centre the Track in Your Bay Window
With the track supported by the return brackets, lift it towards the ceiling and check that it’s sitting evenly within the bay.
- Check the distance between the track and the window on one side.
- Compare it with the distance on the opposite side.
- Adjust the track gently left or right until the gaps look balanced.
An extra pair of hands can be particularly helpful at this stage.
Once you’re happy with the position, you can start securing the ceiling brackets.
5. Secure the Ceiling Brackets
Work your way around the bay, fixing the Slimline ceiling brackets in position.
- Drive the screws through the brackets and into the ceiling.
- Some screws may go directly into timber and feel secure straight away.
- Others may only catch plasterboard and feel a little soft initially.
- Work around the bay securing the brackets, then go back and check any fixings you’re not completely happy with.
If a bracket is too close to the edge of the plaster, slide it back slightly before tightening the screw. This helps avoid damaging the plaster around the edge of the bay.
6. Check and Improve Any Loose Fixings
Once the track is supported all the way around the bay, check each ceiling fixing.
If a bracket doesn’t feel secure, you can improve the fixing using the supplied plug.
- Remove the screw from the bracket.
- Slide the bracket slightly to one side to expose the fixing hole.
- Drill a 6mm hole to the required plug depth.
- Insert the supplied plug.
- Slide the bracket back over the hole and refit the screw.
Repeat this wherever necessary until you’re happy that the track is securely supported.
7. Fit the Slimline Bracket Covers
One of the nice finishing touches on our Slimline track is the small cover that hides each ceiling bracket and screw.
- Slide the cover over the back of the bracket.
- Clip it into place so the bracket and screw are hidden.
Once the covers are fitted, gently check that the track feels secure all the way around the bay.
Slide the gliders along the track to make sure everything moves smoothly, including through the centre joining piece.
8. Hang Your Curtains
Once you’re happy with the installation, fit your curtain hooks or draw rods if you’ve ordered them, and hang your curtains.
Open and close them a few times to check that they run smoothly around the bends.
You can make any small adjustments to the curtain hooks at this stage.
Thinking About Ordering a Slimline Bay Track?
If you’ve watched the fitting video, you’ll have seen how much of the preparation is already done for you. Your Slimline track arrives professionally shaped to match your bay, with the ceiling brackets normally already attached.
The Slimline’s shallower profile makes it a useful option where you want a neat, discreet track or have limited space around your bay window.
You can see our Slimline Bay Window Curtain Track, choose your options and get a price on the product page.
You only need the overall track length to get a price and place your order. I’ll collect the detailed bay measurements afterwards and check them before your track is made.
Slimline Bay Track Fitting FAQs
Is the Slimline Bay Track suitable for DIY fitting?
Yes. If you’re comfortable using a drill, stepladder and screwdriver, fitting a Slimline Bay Track should be straightforward. The video shows you the process before you begin.
Do I need two people to fit a Slimline Bay Track?
Not necessarily, but an extra pair of hands makes the job easier, particularly when lifting the joined track into position and centring it within the bay.
What if my ceiling is plasterboard?
Fit the brackets first, then check each fixing. If one feels soft, remove the screw, drill a 6mm hole, insert the supplied plug and refit the screw. This can give you a stronger fixing where the screw hasn’t gripped securely.
Are the Slimline bracket covers included?
Yes. The Slimline track includes small covers that clip over the ceiling brackets and screws, giving the finished track a neat appearance.
Does the Slimline Bay Track come with an overlap?
The Slimline Bay Track is supplied in two halves with a joining piece. An overlap arm is available as an optional extra if you’d like your curtains to overlap in the centre.
Is the Slimline Track as strong as the Regular Bay Track?
The Slimline is designed to provide a neat, lower-profile appearance while still offering smooth movement and reliable performance when correctly fitted. If you’re unsure whether Slimline or Regular would be better for your curtains, send me a couple of photos of your bay and I’ll help you choose.
Need Help Choosing the Right Bay Window Curtain Track?
If you’re thinking about ordering a made-to-measure bay track but aren’t sure whether Slimline is the right option, I’m happy to help.
You can use the Curtain Track Finder to narrow down your options, or send me a couple of photos of your bay window for personal advice.
